ShearForce12 Scour Control Mat Installation Guide for Shorelines
- 1. Select appropriate anchors for matting based on soil type and consistency (See Recommended Anchors table).
- 2. Prepare seedbed, create a smooth soil surface and eliminate any existing rills, soil clods, sticks or rocks larger than 1-inch in diameter.
- 3. Apply seed and fertilizer, and other amendments at the specified rates, either by broadcasting, drilling or hydro-seeding.
- 4. Position and anchor leading edges of mats at the top of, or over the shoulder of shoreline slope (Figure 1) and secure with a single row
of anchors spaced 1-foot apart. (Fig 1)
- 5. Seam adjacent mats (Figure 2), by butting edges together and anchor on 1.5-foot centers along 3-foot mat edges or 2.0-foot centers along 4-foot mat edges.
- 6. Secure mat body (Figure 3) with anchors installed according to Fig 3. Use additional anchors as necessary to ensure that fabric on bottom of
mat is in intimate contact with underlying soil surface.
- 7. Secure mat seams directly in the wave impact zone with a single row of anchors spaced 1-foot apart. (Fig 1)
- 8. Secure mat edges at or below waterline with a single row of anchors spaced 1-foot apart. (Fig 1)
Additional Tips for Fast & Effective Installation
- Install mat with simulated turf on top and fabric backing against soil surface.
- Continuous fabric contact with the underlying soil surface is very important for effective product performance. If there are noticeable void areas under the mat, additional anchors may be used to ensure good fabric-to-soil contact.
- In channel bends or reaches that are not straight, miter cut joints. DO NOT OVERLAP MAT EDGES.
- Use a heavy-duty utility knife or saw to cut material as necessary.
- When seaming cut ends or edges, DO NOT OVERLAP. Simply butt together cut ends or edges and seam together with a single row of anchors, spaced 1.5-feet to 2.0-feet apart.